Welcome, visitor! [ Register | LoginRSS Feed

Post an Ad
 

£ 15.99

ProLOOK 3 in 1 RUST CONVERTER SEALS & CONVERTS RUST

  • Area: Huddersfield
  • Country: United Kingdom
  • Postal Code: hd6 4dx
  • Listed: October 22, 2015 5:13 pm
  • Expires: This ad has expired
3 in 1 flyer 20 10 15

Description

Pro-look-3 in 1 rust converter
Pro-look-3 in 1 rust converter is a truly outstanding product designed and tested on ships and oil rigs to fight the toughest of weather the north Sea’s can inflict on the metal structures, with its salty water and high winds constantly trying to corrode away the metal, now exclusively available from M. M. Factors for garages, classic cars and bikes and DIY use, at amazing prices, it stops rust seals from further rusting and primes the metal all in one application, for best results remove any loose or flaking rust ensure the surface is clean and dry, shake bottle to thoroughly mix the contents before pouring out sufficient quantity as needed in to a non metallic container, apply with a metal free brush applying a even liberal coat do not try to recoat (a second coat can be applied following the complete drying and converting process see below) NEVER pore any unused liquid back into the bottle.
THREE STAGES OF CONVERSION.
1) The white liquid is applied to the rusty surface which immediately starts the conversion of rust by sealing in the rust and converting the rusty surface into a hard impregnable coating.
2) As the sealing and conversion is taking place the white liquid starts to change to a blue colour as it finally gets to work on the rust surface.
3) When the liquid is finishing it’s conversion the now blue liquid become black before getting harder and harder until the surface is completely sealed. (can take up to 24 hours to complete the process and will be ready to apply paint within a few days).
Although the coating can be over painted we recommend a primer is used directly on the black hardened coating to avoid bleed through.
This conversion only works on rust so if there is no rust or it comes in contact with a non metallic surface the process will not completely take place and the finish may remain in a blue state, all though eventually it will harden to allow over coating although this may take several days to complete.

Ad Reference ID: 22556290b0035725

No Tags

703 total views, 4 today

  

Report problem

Processing your request, Please wait....

Sponsored Links

Leave a Reply

You must be logged in to post a comment.

To inquire about this ad listing, complete the form below to send a message to the ad poster.